مدارات صوتی, همه مطالب

برد پری ساب ووفر همراه با لیمیتر و فیلتر اکتیو با ورودی بالانس

توضیحات :

کاربرد این برد در ساخت ساب ووفر اکتیو سیستم های حرفه ای می باشد ، مدار لیمیتر مانع از کلیپ شدن شکل موج خروجی می شود ، طوری که صدای بریده بریده احساس نشود ، اینطور هم کیفیت صوت کم نمیشود و هم ساب ووفر آسیبی نمی‌بیند ،
کانکتور های ورودی XLR است و با باکس هدر به برد آمپلی فایر که در پست قبلی بود متصل میشود ، ولوم گین هم برای تنظیم گین کل مجموعه تعبیه شده است ، با کلید اختلاف فاز میشود صد و هشتاد درجه اختلاف فاز انداخت تا در جاهایی که نیاز به ایجاد اختلاف فاز وجود دارد این مدار کارایی خودش رو حفظ کند.

مشخصات :

شیب قطع : 24dB/OCT فرکانس قطع : 115Hz (preset)115Hz (preset)
دارای مدار لیمیتر قابل تنظیم
دارای نشانگر پیک و سیگنال
دارای ورودی بالانس
دارای سوییچ اختلاف فاز

Pre-subwoofer circuit with limiter and active filter with balance input

:Description

The application of this circuit is in the construction of active subwoofers of professional systems, the limiter circuit prevents clipping of the output waveform, so that the sound is not cut, so the sound quality does not decrease and the subwoofer is not damaged.
The input connectors are XLR and it is connected with the box header to the amplifier circuit that was in the previous text, the volume gain is also built in to adjust the gain of the whole set, with the phase difference key, the phase difference can be set by one hundred eighty degrees to the places where it is needed There is a phase difference for this circuit to maintain its efficiency.

:Specifications

Cutoff slope: 24dB/OCT
cutoff frequency: 115Hz (preset) 115Hz (preset)
It has an adjustable limiter circuit
With peak and signal indicator
Balance input
Has a phase difference switch

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *