برق اتومبیل, روشنایی, همه مطالب

طراحی و نمونه سازی برد LED DOB خطی با توان 8 وات برای اتومبیل

مشخصات :

رنج ولتاژ ورودی : 11VDC-16VDC
ولتاژ خروجی : 7.5VDC-10.5VDC
جریان خروجی : 750mA C.C محدود شده
رنج تغییرات جریان در بازه دمای کاری : 15%
شار نوری : 150L/W

این مدار به سفارش یکی از تولیدکنندگان لوازم جانبی تزئینی اتومبیل طراحی شده است.
جنس برد از آلومینیوم با ضخامت ۱ میلیمتر انتخاب شده تا دفع و انتقال حرارت به سهولت انجام بشود ، مدار دارای سه سیم ورودی متشکل از مشترک ، راهنما و پروژکتور است ، مدار رو توسط محدود کننده جریان ترانزیستوری طراحی کردیم که
دلیل اول سهولت تهیه اون در بازار داخل و دلیل دوم قیمت کمتر بود ، با هیت سینک در نظر گرفته برای این مدار در بدترین شرایط کار کرد دما به ۶۰ درجه میرسد که برای قطعات الکترونیک دمای نرمالی محسوب میشود ، همونطور که میدونید در تولید پی سی بی با اسکال خاص هزینه پرتی و برس CNC به ساخت برد اضافه میشود بنابراین شکل برد رو مستطیل در نظر گرفتیم تا هزینه تولید پی سی بی کاهش پیدا کند.

Designing and prototyping a linear LED DOB board with a power of 8 watts for cars

:Specifications

Input voltage range: 11VDC-16VDC
Output voltage: 7.5VDC-10.5VDC
Output current: 750mA C.C limited
The range of current changes in the working temperature range: 15%
Luminous flux: 150L/W

This circuit was designed on the order of one of the manufacturers of decorative car accessories.
The material of the board is made of aluminum with a thickness of 1 mm so that the heat transfer can be done easily, the circuit has three input wires consisting of common, guide and projector, we designed the circuit by transistor current limiter which
The first reason was the ease of obtaining it in the domestic market, and the second reason was the lower price, considering the heat sink for this circuit, it worked in the worst conditions, the temperature reaches 60 degrees, which is considered a normal temperature for electronic components, as you know in PC production. With a special scale, the cost of CNC milling and brushing is added to the board, so we considered the shape of the board to be rectangular in order to reduce the cost of PCB production.

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *